HENRY 599多功能胶粘剂乳液

产品描述：

● HENRY 599多功能胶粘剂乳液是一款绿色环保的水性添加剂，与水泥砂混合后能大幅提高其强度、施工性能和耐久性能。

 

产品特点：

● 提高胶粘剂粘结强度；

● 提高抗冲击、抗冻等性能；

● 提高柔韧性；

● 水性环保。

 

用法与用量：

1、基层需坚固、干净。

2、作为瓷砖胶粘剂：与水泥砂混合，推荐水泥砂重量比为1:1-1:2，使用42.5等级的普硅水泥，加入总量20-24%的本产品，搅拌均匀。

3、作为界面剂：与水泥砂混合，推荐水泥砂重量比为2:1-1:1，使用42.5等级的普硅水泥，加入总量24-33%的本产品，搅拌均匀。

4、作为找平材料：用本产品代替抹灰材料所用的水，能有效提高性能。

 

注意事项：

● 施工温度应在5-35℃之间。施工完毕后及时用清水冲洗，不慎入眼，应用大量清水冲洗，并及时就医。

 

执行标准：

● 与水泥砂以一定比例混合（乳液：水泥：砂=23:40:60），可以满足JCT547-2017中C1T的全项指标。

 

储存运输：

● 本品须存放于室内5℃-35℃，防止冰冻、曝晒。保质期为12个月。

 

包装：

● 20KG/桶

 

温馨提示：

● 任何大面积施工前，都必须先做小面积适用性测试，任何因小面积测试可见的风险而没有规避带来的损失，我司概不负责，在产品应用方面的问题可咨询相应的技术人员。

 

 

 

 

HENRY 599 Multifunctional Adhesive Emulsion

 

Product description:

This product is a green and water-based additives, mixed with cement sand can greatly improve its strength, construction performance and durability.

 

Features:

Increase adhesive bonding strength;

Improve shock resistance, frost resistance and other properties;

Improve flexibility;

Water-based, environmentally friendly.

 

Dosage and Administration:

1.The base shall be firm and clean.

2.As ceramic tile adhesive: mix with cement sand. Weight ratio of cement sand is recommended to be 1:1-1:2.

3.As interfacial agent: mix with cement sand, the recommended weight ratio of cement sand is 2:1 to 1:1. Use 42.5 grade common silicon cement, add 24-33% of this product and mix evenly.

4. As leveling material: water used in this product instead of plastering material can effectively improve the performance.

 

Note:

The construction temperature should be between 5-35℃.After completion of construction, flush with clean water immediately. If it gets into eyes accidentally, flush with plenty of clean water and seek medical advice promptly.

 

Executive standard:

Mixed with cement sand in a certain proportion (emulsion: cement: sand =23:40:60), can meet the full index of C1T in JCT547-2017.

 

Storage and Transportation:

This product must be stored indoors at 5℃-35℃ to prevent freezing and insolation.The shelf life is 12 months.

 

Packing:

20 kg/barrel

 

Tips:

Any large area before construction, must first do the small area applicability test, any small area test because of the visible risk and did not avoid the loss, our company is not responsible, in the product application problems can consult the corresponding technical personnel.