专业的解决方案助你成功 Professional Solutions For Success
首页 > 瓷砖辅材系统 > 防水材料系统 > HENRY 529

产品图片和视频

HENRY 529 防水橡胶膜

● 与多种基材粘结强度高
● 用于管根、地漏口、阴阳角等的防水
● 开桶即用,低VOC,绿色环保

产品描述

● HENRY 529是一款专用于管根、地漏口、阴阳角等特殊部位防水处理的高分子防水产品,涂刷时无需使用纤维布增强。通过与混凝土、水泥砂浆找平、PVC和金属形成高强度结合,能在特殊部位形成牢固的防水节点。

 

产品特点:

● 与多种基材粘结强度高;

● 用于管根、地漏口、阴阳角等的防水;

● 开桶即用,低VOC,绿色环保。

 

用法与用量:

● 基层表面应坚固、干净,没有任何灰尘、油渍、涂料等影响粘结的物质。

● 将本品搅拌均匀,对裂缝、接缝处、管根、排水口等处进行局部增强处理,再用毛刷或辊筒进行涂刷,等待约2小时,防水膜完全干燥后,可进行下一步施工。

● 用量:1kg覆盖0.6平方(0.5mm成膜厚度)。

 

注意事项:

● 施工温度应在5-35℃之间。施工完毕后及时用清水冲洗,不慎入眼,应用大量清水冲洗,并及时就医。

 

执行标准:

● JCT2415-2017

 

储存运输:

● 本品须存放于室内5℃-35℃,防止冰冻、曝晒。保质期为12个月。

 

包装

● 1KG/桶

 

温馨提示

● 任何大面积施工前,都必须先做小面积适用性测试,任何因小面积测试可见的风险而没有规避带来的损失,我司概不负责,在产品应用方面的问题可咨询相应的技术人员。

 

 

 

 

Product description:

HENRY 529 is a kind of polymer waterproof product specially used for waterproof treatment of special parts such as canal root, floor drain mouth, corner, etc. It does not need to use fiber cloth reinforcement when painting. By forming a high strength combination with concrete, cement mortar leveling, PVC and metal, it can form firm waterproof joints in special parts.

 

Features:

High bonding strength with various substrates;

Used for pipe root, floor drain, corner, etc.

Out of the box, low VOC, green and environmental protection.

 

Dosage and Administration:

Primary Treatment:Base surface should be firm, clean, without any dust, grease, coating and other materials that affect bonding.

Construction method:Stir the product evenly, strengthen the cracks, joints, pipe roots, drains and other places, and then apply with a brush or roller. Wait for about 2 hours. After the waterproof film is completely dry, the next step of construction can be carried out.

Usage:Cover 0.6m2 (0.5mm film thickness) with 1kg.

 

Note:

The construction temperature should be between 5-35℃.After completion of construction, flush with clean water immediately. If it gets into eyes accidentally, flush with plenty of clean water and seek medical advice promptly.

 

Executive standard:

JCT2415-2017

 

Storage and transportation:

This product must be stored indoors at 5℃-35℃ to prevent freezing and insolation.The shelf life is 12 months.

 

Packing:

1 kg/barrel

 

Tips:

This product is only applicable to indoor, any large area before construction, must first do the small area applicability test, any small area test because of the visible risk and did not avoid the loss, our company is not responsible, in the product application problems can consult the corresponding technical personnel.